AOS HS5
The AOS HS5 is the ultimate in speed and precision, delivering lightning-fast acceleration and blistering top speeds over 200 mph (320 kph) to capture every moment with breathtaking clarity.
Key Features
Immersive 155° FPV Experience
Immerse yourself in the action with a full 155-degree field of view (FOV) for the FPV camera with no props in view. This expansive view is perfect for DJI O3 users and guarantees an immersive flight experience for both professionals and enthusiasts. ND filters for the O3 Camera are fully supported.
Advanced Aerodynamic Design
The aerodynamic shells of the AOS HS5 have been optimized with the use of CFD tools to minimize the drag on the drone at high speeds. The tail fins add aerodynamic stability for smooth footage. Aerodynamic spinners for the props minimize the drag of the motors.
Easy to build
The AOS HS5 is designed to be an incredibly easy and user-friendly FPV frame to build. The front shell has space and a place for every component: your Camera, VTX, Receiver, Antennas, and Electronics stack are all contained inside.
Easy to fly
A simple twist locks and unlocks the rear shell for easy battery swaps. Cutouts allow access to the USB ports of the VTX and flight controller as well as providing essential cooling for the ESC. The rear shell only contains the battery making it straightforward to change packs without disturbing any of your electronics.
Start slow with your usual 30 degree camera uptilt and work up to ultra high speed runs with up to 90 degrees camera uptilt.
Technical Specs
Supports up to 6" Props (Recommend APC 5.25” Props)
Supports 30.5 mm Electronics Stacks
Supports all popular Digital and Analog VTXs
155° FOV no props in view (at typical high speed camera uptilt)
Fully DJI O3 compatible (ND filters)
Supports 19 - 20 mm cameras
Supports up to 1800mAh 6S Batteries (90 x 40 x 55 mm)
⌀16 - ⌀19mm motor mounting (2808 1950KV Recommended)
